Filter
Top Products
ENG-49
Changing
Setup Menu
CHANGING S
ETUP MENU
Œ
Dolby Digital Out
- PCM : Converts to PCM(2CH) audio.
- Bitstream : Outputs Dolby Digital via the digital output. Select Bitstream when connecting to a
Dolby Digital Decoder.
´
MPEG-2 Digital Out
- PCM : Converts to PCM(2CH) audio.
- Bitstream : Converts to MPEG-2 Digital Bitstream (5.1CH or 8CH). Select Bitstream when using
the Digital Audio Output.
ˇ
DTS
Select On when connecting to a DTS Decoder.
- Off : Doesn’t output digital signal.
- On : Outputs DTS Bitstream via digital output.
Note
• There is no analog audio output when you play a DTS sound disc.
¨
Dynamic Compression
- On : To select dynamic compression.
- Off : To select the standard range.
ˆ
PCM Down Sampling
- On : Select this when the Amplifier connected to the player is not 96KHz compatible. In this
case, the 96KHz signals will be down converted to 48KHZ.
- Off : Select this when the Amplifier connected to the player is 96KHz compatible. In this case,
all signals will be output without any changes.
Note
Even when PCM Down sampling is Off
• Some discs will only output down sampled audio through the digital outputs.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
AK68-00604B_2_eng 1/24/05 11:42 AM Page 49