Filter
Top Products
getting started
10_ getting started
Rear Panel
1. AUDIO OUT JACKS
Use audio cables to connect to the Audio input
jacks of your television or audio/video receiver
2. VIDEO OUT JACK
- Use a video cable to connect to the Video input
jack on your television.
3. COMPONENT VIDEO OUT JACKS
- Use these jacks if you have a TV with
Component Video in jacks. These jacks
provide P
R
, P
B
and Y video.
- If P-SCAN (480p) is set to “ON” in Video
Output of the Setup Menu, progressive scan
mode will work.
- If I-SCAN (480i) is set to “ON” in Video Output
of the Setup Menu, interlaced scan mode will
work.
4. DIGITAL AUDIO OUT JACKS
Use a coaxial digital cable to connect to an
A/V Amplifier that contains a Dolby Digital,
MPEG2 or DTS decoder.
Note
- Consult your TV User’s Manual to find out if your TV supports Progressive Scan (P-SCAN).
If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan
settings in the TV’s menu system.
- See pages 50 ~ 51 to get more information on how to use the setup menu.
1
2 3
4