Filter
Top Products
System Setup
English - 23
Presetting Channels with the Auto Setup
function
This feature allows you to manually set the DVD Recorder tuner band to
Antenna or Cable, whichever you connected to the Antenna In jack during
initial setup.
1. With the DVD Recorder in Stop mode/No Disc mode, press the MENU
button.
2. Press the
▲▼
buttons to select Setup, then press the OK or
►
button.
3. Press the
▲▼
buttons to select Install, then press the OK or
►
button.
4.
Press the
▲▼
buttons to select Auto Setup, then press the OK or
►
button.
The message “Your data will be lost. Press [OK] to continue, [MENU] to exit.” is
displayed.
5. Press the OK button to continue.
If you want to exit, press the EXIT button.
6. Channel scan will be started.
Press the OK button to stop the Auto Setup.
Presetting Channels with the Manual Setup
function
You can add preset channel that Auto Channel Search missed. And you
can delete a channel you wish to remove. You can programme the order of
channels.
1. With the DVD Recorder in Stop mode/No Disc mode, press the MENU button.
2. Press the
▲▼
buttons to select Setup, then press the OK or
►
button.
3. Press the
▲▼
buttons to select Install, then press the OK or
►
button.
4. Press the
▲▼
buttons to select Manual Setup, then press the OK or
►
button.
5. Press the
▲▼
buttons to select a PR(programme) you wish to edit, delete,
or swap, then press the OK or
►
button.
Select Edit, Delete or Swap using the
▲▼
buttons, then press the OK or
►
button.
• Edit : You can add or edit PR(programme). After change PR
informations(CH, Name, MFT), select Done, then press the OK button.
- CH : Tune the channel using
◄ ►
buttons.
- Name : Display station name automatically detected in broadcasting signal.
If not detected, you can edit name by using
▲▼◄ ►
buttons.
- MFT : You can tune up the channel frequency better using
◄ ►
buttons.
• Delete : the channel information of selected PR(programme) will be
removed.
• Swap : You can swap the channel information of two PR(programme). For
example, if you wish to swap PR2 and PR5, select swap at PR2, then press
the OK button at PR5.
Manual Setup
PR CH Name Edit
01 1 ----
►
02 --- ----
►
03 --- ----
►
04 --- ----
►
05 --- ----
►
06 --- ----
►
07 --- ----
►
MOVE OK RETURN EXIT
Edit
Delete
Swap
Manual Setup
Manual Setup
OKMOVE
Done
PR
CH
Name
MFT
01
◄ 1 ►
- - - -
--- ---
Auto Channel Memory
17%
Stop
01274J-R150,155-AFR-ENG.indb 2301274J-R150,155-AFR-ENG.indb 23 2007-04-20 오후 2:27:512007-04-20 오후 2:27:51