Filter
Top Products
Getting Started
English - 9
Before reading the user’s manual
Make sure to check the following terms before reading the
user’s manual.
Icons that will be used in manual
Icon Term De nition
DVD
This involves a function available
in DVD or DVD-R/DVD-RW(V)/+R
discs that have been recorded and
nalised.
RAM
This involves a function available in
DVD-RAM.
-RW
This involves a function available in
DVD-RW.
-R
This involves a function available in
DVD-R.
+RW
This involves a function available in
DVD+RW.
+R
This involves a function available in
DVD+R.
CD
This involves a function available in a
data CD (CD-R or CD-RW).
JPEG
This involves a function available in
a data picture CD-R/-RW or DVD-RAM/
DVD±RW/DVD±R discs.
MP3
This involves a function available in a
data CD-R/-RW or DVD-RAM/
DVD±RW/ DVD±Rdiscs.
MPEG4
This involves a function available in a
data CD-R/-RW or DVD-RAM/
DVD±RW/DVD±R discs.
Caution
This involves a case where a function
does not operate or settings may be
cancelled.
NOTE
This involves tips or instructions on
the page that help each function
operate.
One-Touch
button
A function that can be operated by
using only one button.
ANYKEY
button
A function that can be operated by
using ANYKEY button.
About the use of this user’s manual
1) Be sure to be familiar with Safety Instructions before using
this DVD Recorder. (See pages 2-5)
2) If a problem occurs, check for Troubleshooting.
(See pages 68-69.)
Copyright
©2007 Samsung Electronics Co.
All rights reserved; No part or whole of this user’s manual may
be reproduced or copied without the prior written permission
of Samsung Electronics Co.
How to use the DVD Recorder
Step 1 : Select the disc type
This DVD Recorder can record on the following types of discs.
If you want to repeatedly record on the same disc or you want
to edit the disc after recording, select a rewritable DVD±RW or
DVD-RAM type disc.
If you want to save recording without any change, choose a
non-rewritable DVD±R.
●
DVD-R150
●
DVD-R155
Step 2 : Format the disc to start recording
The DVD Recorder automatically starts formatting when an
unused disc is inserted. This is required for the preparation of
recording on a disc.
Using a DVD-RAM
This type of disc can be formatted in DVD-Video Recording
format (VR mode). You can edit recorded video and create
a playlist and edit video in a speci c sequence according to
your requirements.
Using a DVD±RW/+R
• When an unused DVD±RW/+R disc is rst inserted, the
message “Uninitialised Disc. Do you want to initialise this
disc?” will be displayed. If you select Yes, initialising will be
start. DVD-RW disc can be formatted in either DVD-Video
format (Video mode) or DVD-Video Recording format
(VR mode)
• With DVD+RW discs have no di erence between DVD-Video
format (Video mode) and DVD-Video Recording format
(VR mode).
Using a DVD-R
Formatting a disc is unnecessary and only Video Mode
Recording is supported. You can play this type of discs on
various DVD components only when they have been nalised.
You can only use either the VR or Video mode on a
DVD-RW, but not both at the same time.
You can change the DVD-RW format to another
format by reinitialising. It should be noted that the
disc's data will be lost when changing formats.
Step 3 : Recording
There are two di erent recording methods, Direct Recording
and Timer Recording. Timer recording is classi ed as a Date :
Once, Daily, MO-SA, MO-FR, W-SA, etc.
Recording mode : XP (high quality mode), SP (standard quality
mode), LP (long recording mode), and EP (extended mode)
according to the recording mode. When recording is set in the
FR mode, the best quality picture is recorded with regards to
the remaining time on the disc.
▌
▌
■
■
▌
01274J-R150,155-AFR-ENG.indb 901274J-R150,155-AFR-ENG.indb 9 2007-04-20 오후 2:27:242007-04-20 오후 2:27:24