Filter
Top Products
Choosing a Connection Choosing a Connection
The following show examples of connections commonly used to connect the DVD player with a
TV and other components.
Before Connecting the DVD Player
Connection to a TV (For Video)
• Always turn off the DVD player, TV, and other components before you
connect or disconnect any cables.
• Refer to the owner’s manual of the additional components you are connecting for
more information on those particular components.
Method 1
Method 2
Method 3
R1
R2
L1
R
Front (RH) Front (LH) Center
Rear (RH) Rear (LH) Subwooper
L
L2
R FRONT L
R SURROUND L
CENTER
S/W
MIXED AUDIO OUT
Mixed Audio Out Analog Audio Out
(DVD-S324/DVD-S325/DVD-S425 only)
Digital Audio Out
2ch Amplifier
Audio Input Jacks
5.1ch Analog Amplifier
Audio Input Jacks
Dolby Digital Decoder
Digital Audio Input Jacks
AUDIO
DVD
TV (Normal, Widescreen, Projection, etc..)
Good picture
Basic Audio
Better picture
Best picture
Method 1
Method 2
Method 3
Audio Output Jacks
OR
OR
OR
AV Cable
S-Video
Cable
Scart Cables
(not included)
Video Output Jack
S-Video Jack
Scart Jack
DVD
TV
• Method 1 DVD Player + TV with Video Input Jack
• Method 2 DVD Player + TV with S-Video Input Jack
(If S-Video is selected in the VIDEO OUT SELECT.)
• Method 3 DVD Player + TV with Scart Input Jack (Audio & Video)
(If Scart jack is selected in the VIDEO OUT SELECT.)
NOTE
• If Scart Jack is selected, S-Video will not work.
• If S-Video is selected, Scart Jack will not work.
CONNECTIONS
20 21
Connection to an Audio System
An Example of Connecting DVD with Other Equipment
• Method 1 DVD Player + 2ch Stereo
Amplifier or Dolby Pro Logic Decoder
• Method 2 DVD Player + Amplifier with 5.1ch
Analog Input Jacks
• Method 3 DVD Player + Amplifier with Dolby
Digital Decoder/DTS Decoder