Filter
Top Products
28
1
Firmly secure the pegs to the both sides of the stand base using 8 screws provided.
How to assemble and attach the
Stand-Base
This guide is for the SMN5040 stand.
2
Using the 4 screws for securing the stand pegs and the monitor, firmly attach the monitor to the
stand pegs. (The exterior of the set may be different than the picture.)
3
For your convenience, the angle of the PDP may be adjusted up to 20° left/right.
Note
• Stand is sold seperately. Check with your dealer.
Warning
Firmly secure the stand for the PDP
before moving it, as the stand may fall
and could cause serious injury.