Filter
Top Products
English-14
Plug & Play
When the set is initially powered on, you are automatically presented
with a series of basic customer settings.
The following settings are available.
1
If the set is in standby mode, press the
POWER(
) button on the
remote control.
Result
: The message
Plug & Play
is displayed.
It appears for a little while, and then the
"Check antenna input."
menu is displayed with the
OK
selected.
2
Press the
ENTER
button.
Result
: The country menu is displayed:
Asia/W.Europe - CIS/E.Europe - China -
Hongkong/UK - Austrailia - NZL/Indonesia -
South Africa - America
3
Select your
Area
by pressing the or button.
Press the
ENTER
button.
Result
:
The
Auto Store
menu is displayed with the
Start
selected.
4
Press the
ENTER
button.
Result
: The channel search will start and end automatically.
5
Select the
Hour, min
or
am/pm
by pressing the or button.
Set the
Hour, min
or
am/pm
by pressing the or button.
(Refer to “
Setting the Clock
” on page
36
)
6
Press the
MENU
button to confirm your setting.
Result
: The message
Enjoy your viewing
is displayed,
and then the channel which has been stored will be
activated.
02-BN68-00755A-00Eng.qxd 8/5/04 8:07 AM Page 14