Filter
Top Products
English-18
Storing Channels Manually
You can store up to 100 channels, including those received via
cable networks. When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you wish to
identify.
1
Press the
MENU
button.
Result
: The main menu is displayed.
2
Press the or button to select the
Channel
.
Result
: The options available in the
Channel
group are displayed.
3
Press the
ENTER
button.
4
Press the or button to select the
Manual Store
.
Press the
ENTER
button.
Result
: The options available in the
Manual Store
group are
displayed with the
Prog. No
selected.
5 Press the
ENTER
button again.
To assign a programme number to a channel, find the correct
number by pressing the or button and then press the
ENTER
button
.
6
Press the or button to select
Colour System
.
Press the
ENTER
button.
Select the
Colour System
required by pressing the or button
repeatedly and then press the
ENTER
button.
Result
: The colour standards are displayed in the following order:
AUTO - PAL - SECAM - NT 4.43 - NT 3.58
7
Press the or button to select
Sound System
.
Press the
ENTER
button.
Select the
Sound System
required by pressing the or button
repeatedly and then press the
ENTER
button.
Result
: The sound standards are displayed in the following order:
BG - DK - I - M
8
For all the channels to move to the required channel numbers,
repeat steps
5
to
6
after selecting
Prog. No
by pressing the
or button.
You can also set
Prog.No
by pressing number button on the
remote control.
02-BN68-00755A-00Eng.qxd 8/5/04 8:07 AM Page 18