Filter
Top Products
English-45
Coarse and Fine Tuning of the Image
➣
Press the PC button on the remote control to select the PC mode.
➣
This function does not work in DVI-Digital mode.
1 Press the MENU button.
Result
:
The main menu is displayed.
2 Press the or ❷ button to select Setup.
Press
ENTER
or ❿button.
Result
:
The options available in the Setup group are displayed.
3 Press the or ❷ button to select PC Setup.
Press the
ENTER
or ❿ button.
Result:
The options available in the PC Setup menu are displayed.
4 Press the
ENTER
or ❿ button again.
Result
:
The Image Lock menu is selected.
5 Press the or ❷ button to select Coarse or Fine.
Press the
ENTER
or ❿ button.
Result
:
The horizontal bar is displayed.
6 Press the ➛ or ❿ button to adjust the screen quality.
Vertical stripes may appear or the picture may become blurry.
7 When you are satisfied with the settings, press the MENU button to
return to the previous menu or press the
EXIT button to return to
normal viewing.
The purpose of picture quality adjustment is to remove or reduce
picture noise.
If the noise is not removed by Fine tuning alone, then adjust the
frequency as best as possible (coarse) and Fine tune again.
After the noise has been reduced, re-adjust the picture so that it is
aligned on the center of screen.
BN59-00373
BN59-00373A
SET RESET
P.SIZE SLEEP PIP
DNIe PC
SWAP P
REW STOP
PLAY/PAUSE FF
BN68-448D-03Eng-final 12/19/03 10:53 PM Page 45