Filter
Top Products
English-23
Fine Tuning Channel Reception
If the reception is clear, you do not have to fine-tune the channel,
as this is done automatically during the search and store operation.
If however the signal is weak or distorted, you may have to fine-tune
the channel manually.
1 Press the MENU button.
Result
:
The main menu is displayed.
2 Press the or ❷ button to select Channel.
Press the
ENTER
or ❿ button
.
Result:
The options available in the
Channel
group are displayed.
3 Press the or ❷ button to select Fine Tune.
Press the
ENTER
or ❿ button
.
4 Press the / button to select the channel that you wish to fine
tune.
5 Press ➛ or ❿ button until you reach the setting to obtain a sharp
and clear picture and good sound quality.
To store the setting, press the
ENTER
button
.
6 To reset the fine tuning, select Reset by pressing or ❷ button and
then press the
ENTER
button
.
To return to the previous menu, select Return by pressing ➛ or ❿
button and press the
ENTER
button.
LNA (Low Noise Amplifier)
If the set is operating in a weak-signal area, sometimes the LNA
function can improve the reception.
1 Press the MENU button.
Result
:
The main menu is displayed.
2 Press the or ❷ button to select Channel.
Press the
ENTER
or ❿ button
.
Result:
The options available in the
Channel
group are displayed.
3 Press the or ❷ button to select LNA.
Press the
ENTER
or ❿ button
.
Result:
The
LNA
menu is displayed.
4 Select On by pressing or ❷ button.
Result
:
Amplifies signals when antenna reception is poor.
However if incoming signals are interfering with each
other, turn off
LNA
as it may malfunction.
5 When it has finished, press the EXIT button to return to normal
viewing.
BN68-448D-03Eng 10/29/03 1:09 AM Page 23