Filter
Top Products
English-32
Setting the Dolby Digital Surround
The following Dolby surround settings can be adjusted to suit your
personal preferences.
◆ Dolby Pro-Logic II On/Off.
◆ Dynamic range for adjusting the volume Dolby Pro-Logic II
On/Off during night time viewing.
◆ Speaker setting for Dolby Digital surround.
◆ Activation/Deactivation of test tone to simulate the volume
on each speaker.
◆ Volume level control of the each speaker.
◆ Delay time for the rear speakers (0~15ms).
1 Press the MENU button.
Result
:
The main menu is displayed.
2 Press the or ❷ button to select Sound.
Result
: The options available in the Sound group are displayed.
3 Press the
ENTER
or ❿ button.
4 Press the or ❷ button to select Dolby Digital.
Press the
ENTER
or ❿ button.
Result
: The option available in the Dolby Digital group are
displayed with
Dolby Pro-Logic II selected.
5 Press the
ENTER
or ❿ button.
6 Select the option (On or Off) by pressing the or ❷ button.
Press the
ENTER
or ❿ button.
➢
You can also select these option(Dolby Pro-Logic II On/Off) by
simply pressing the
SURROUND button on the remote control.
➢
For further details of output depending on each option, refer to
34 page.
7 Press the or ❷ button to select Dynamic Range.
Press the
ENTER
or ❿ button.
If you wish to adjust the volume for nighttime viewing, select
Off by
pressing the
or ❷ button.
8 Press the
ENTER
or ❿ button.
9 Press the or ❷ button to select Speaker Setting.
Press the
ENTER
or ❿ button.
Result
: The options available in the Speaker Setting group are
displayed with front left selected.
10 Select the speaker (Front Left, Center, Front Right, Rear Right,
Rear Left, Sub Woofer) to be adjusted by pressing the
or ❷ button.
Press the
ENTER
or ❿ button.
➣
When 'Front Left/Right' is set to 'Large' on the Speaker Setting menu, the
sub woofer is automatically turned off.
If the sub woofer is switched on, 'Front Left/Right' is automatically set to
'Small'.
STILL
S.MODE
DUAL I-II
SURROUND
BN59-00373
BN68-448D-03Eng 10/29/03 1:09 AM Page 32