Samsung MX-C730D DVD Player User Manual


 
18 English
English 19
03 Setup
Disc Playback
Press the 1. OPEN/CLOSE (^) button.
Place a disc gently into the tray with the disc's 2.
label facing up.
Press the 3. OPEN/CLOSE (^) button to close
the disc tray.
NOTE
Resume function: When you stop disc play, the `
product remembers where you stopped, so when
you press PLAY button again, it will pick up where
you left off. (This function works only with DVDs.)
Press the STOP button twice during playback to
disable the Resume function.
If no buttons are pressed on the product or
`
remote control for more than 3 minutes when the
product is in Pause mode, it will be changed to
Resume stop mode. and after another 5 minutes
in Resume stop mode, it will be changed to
screen saver mode.
The initial screen may appear different, depending
`
on the content of the disc.
Pirated discs will not run in this product because
`
it violates the CSS (Content Scrambling System :
a copy protection system) recommendations.
DTS Audio is not supported.
`
will appear when an invalid button is pressed.
Selecting a Disc in the Disc changer
To select a specific disc, press the DISC SKIP button on the
remote control, until the required disc indicator flashes.
Result: Each disc is selected.
or
Press the Disc 1, Disc 2, Disc 3, Disc 4 or Disc 5
button on the main unit to select a specific disc while
the Disc Tray is closed.
NOTE
If the disc selected is not loaded, the next disc is
`
played automatically.
If you press the DISC CHANGE button on the
`
main unit, you can load another disc and the
playback is not interrupted.
TV Screen Saver/Power Saving Function
If the •
product
is left in the stop mode more than 5
minutes without any user interface, a screen saver
will appear on your TV.
If the •
product
is left in the screen saver mode for
more than 30 minutes, the power will
automatically turn off.
Basic Functions
Audio CD(CD-DA)/MP3/WMA Playback
BA
Track01
1/17
0:15 / 3:59
Function DVD/CD Repeat Play Mode
Insert an Audio CD(CD-DA) or an MP3 Disc into the 1.
disc tray.
For an Audio CD, the first track will be played •
automatically.
- Press the [] buttons to move to the
previous/next track.
For the MP3/WMA disc, press the • _+
buttons to select Music, then press the
ENTER button.
- Press the ▲▼_+ buttons to select a
desired file and press the ENTER button.
- Press the () buttons to move to the
previous/next pages.
Press the 2. STOP (@) button to stop playback.
NOTE
Some MP3/WMA-CDs may not play, depending on `
the recording mode.
Table of contents of a MP3-CD varies depending on `
the MP3/WMA track format recorded on the disc.
WMA-DRM files cannot be played. `
/ 04 Basic Functions
MX-C630D-C730D-XFA-ENG-With Tape+NO AM.indd 19 2010-5-21 11:19:51