Filter
Top Products
26 English
Basic Functions
English 27
Listening to Radio
Using buttons on the Remote Control
Press the 1. FUNCTION button to select FM
band.
Tune in to the desired station.2.
Automatic Tuning 1• : Press the TUNING
MODE button to select PRESET and then press
TUNING ( ) buttons to select the preset
station.
Automatic Tuning 2• : Press the TUNING
MODE button to select AUTO and then press
and hold the TUNING (
) button to
automatically search for active broadcasting
stations.
Manual Tuning• : Press the TUNING MODE
button to select MANUAL and then briefly
press the
TUNING (
) button to increase or
decrease the frequency incrementally.
Using buttons on the product
Press the1. TUNER
button to select FM band.
Select a broadcast station.2.
Automatic Tuning 1• : Press the STOP ( @ )
button to select PRESET and then press the
[ ]
buttons
to select the preset station.
Automatic Tuning 2• : Press the STOP ( @ )
button to select AUTO and then press and hold
the
[ ]
buttons
to automatically search the
band.
Manual Tuning• : Press the
STOP ( @ )
button
to select MANUAL
and then press the
[ ]
buttons
to tune in to a lower or higher
frequency.
Setting Mono/Stereo
Press the MO/ST button.
Each time the button is pressed, the sound •
switches between STEREO and MONO.
In a poor reception area, select • MONO for a clear,
interference-free broadcast.
NOTE ✎
This applies only when listening to an FM `
station.
Presetting Stations
Example : Presetting FM 89.10 in the memory
Press the 1. FUNCTION button to select FM.
Press the 2. STOP ( @ )
button on the front panel
to
select <MANUAL> mode.
Press the 3.
TUNING ( ) button
to select
<89.10>.
Press the 4. ENTER button.
Number flashes on the display.•
Press the 5.
[ ]
buttons on the front panel
to
select preset number.
You can select between 1 and 15 presets.•
Press the 6. ENTER button again.
Press the • ENTER button before number
disappears from the display.
Number disappears from the display and the •
station is stored in memory.
To preset another station, repeat steps 2 to 5. 7.
To tune in to a preset station, press the •
TUNING ( )
buttons
on the remote control to
select a channel.
MX-C630D-C730D-XFA-ENG-With Tape+NO AM.indd 26 2010-5-21 11:20:00