Filter
Top Products
32 English
English 33
05 Advanced Functions
If you record the MP3 CD, the file is copied into the
`
USB device totally.
“CHECK FILE”
“FILE COPY”
“COMPLITE” is
displayed. When the recording is done, “STOP” will
be displayed.
If there is the same file name, "CHECK FILE"
`
"FILE EXISTED" is displayed, and the function is
canceled.
Tuner/Cassette Tape/External Source
“RECORDING” is displayed.
`
To stop recording, press the STOP (5.
@
) button
and then automatically create and save as the
MP3 file.
After the recording, a directory named `
“RECORDING”(CD), “CD COPY”(MP3 CD), “TUNER
RECORDING”, “TAPE RECORDING” or “AUX
RECORDING”, will be created in your device.
NOTE ✎
Do not disconnect the USB or the AC Cord during the
`
recording as this may cause file damage.
If you disconnected USB device during the recording,
`
the main unit will be power off and you may not delete
the recorded file, In this case, please connect the USB
device to the PC and backup the USB data on the PC
first and then format the USB device.
When the USB memory is not enough, it will be
`
displayed “NOT ENOUGH MEMORY”.
The recording works if the USB device or the HDD is
`
formatted in the FAT file system. (The NTFS file system
is not supported.)
When you use CD high speed search function, the CD
`
recording can’t work.
Sometimes, the recording time may be longer with
`
some USB devices. (See page 8)
When the CD recording, the DSP/EQ and GIGA
`
SOUND functions can not work and automatically
change to PASS.
When the CD recording, the REPEAT function can not
`
work and automatically changes to OFF.
Even if you use the MIC function during the CD
`
recording, the Microphone voice will not be recorded.
You can not record the radio when searching or no
`
available frequencies in the Tuner mode.
To delete a file
You can delete a file on your USB device.
Play a file you want to delete.1.
Press the 2. DELETE button on the main unit.
Press [3.
_+
] on the remote control to select YES.
Press the ENTER button.4.
The selected file will be deleted.5.
Recording Speed
Each time you press and hold the 1. RECORDING
SPEED button on the remote control, the
recording speed will change as follows:
REC SPEED x 1
REC SPEED x 3
While the Tuner, Cassette Tape or External Source `
is recording, the recording speed does not
supported.
When you select REC SPEED x 3, the audio sound
`
will not be output.
MX-C630D-C730D-XFA-ENG-With Tape+NO AM.indd 33 2010-5-21 11:20:12