Filter
Top Products
Using the product 3-2
3-2 Connect to the host PC using a LAN cable
The host PC must have an IP address.
After connecting the LAN and setting the IP address, you can view the host PC screen on the monitor.
Use the USB port to connect an external storage device (DSC, MP3, external storage, etc.).
Connecting one Host PC to many client device is possible only when virtualization solution like vmware is installed in Host
PC.
The UPoE PD adapter functions only when a CISCO switch device, which supports 60W-level PoE, is connected.
Host PC
Hub
LAN Cable
Monitor
Connect the UPoE PD adapter on the back of the monitor to the PSE device using the LAN cable.
Connect the mouse and the keyboard to the USB ports.
Connect the LAN port on the back of the monitor and the hub.
Connect the hub and the LAN port of the host PC.