Filter
Top Products
36
Setup and Reset
Power On Adjustment
You can set the warm-up time for the screen to turn on after the power button is pressed.
(Range: 0 – 50 seconds)
NOTE
A warm-up time that is too short may damage the product due to overvoltage.
Setting Power On Adjustment
1. Press [
m
] on the product.
2. Move to Setup using the [ ] buttons. Next, press the [ ] button.
3. Move to Power On Adjustment using the [ ] buttons. Next, press the [ ] button.
The following screen will appear.
Adjust Return
Power On Adjustment : 0
Power On Adjustment
Power On Adjustment
4. Adjust the Power On Adjustment setting using the [ ] buttons.
Advanced Settings
Congures the settings more elaborately.
Conguring Fan & Temperature
1. Press [
m
] on the product.
2. Move to Setup using the [ ] buttons. Next, press the [ ] button.
3. Move to Advanced Settings using the [ ] buttons. Next, press the [ ] button.
4. Move to Fan & Temperature using the [ ] buttons. Next, press the [ ] button.
The following screen will appear.
Move Enter Return
Fan Control : Manual
Fan Speed Setting : 3
Temperature Control : 77
Current Temperature : 60
Fan & Temperature
Fan & Temperature
• Fan Control: Selects auto or manual for the fan speed settings.
• Fan Speed Setting: Sets the fan speed within a range of 0 and 100.
• Temperature Control: Detects the product's internal temperature and species the desired temperature.
The product is set to 77 °C by default.
NOTE
• The picture will be dimmed if the temperature exceeds the specied temperature, and the product
will automatically power off to prevent overheating if the temperature keeps rising.
• It is best to use the product at temperatures 75 - 80 °C (based on ambient temperature of 40 °C).
• Refer to "Specications" herein for details about operating conditions.
• Current Temperature: Shows the current temperature of the product.
5. Set the temperatures using the [ ] buttons.