Filter
Top Products
57
Using "PCoIP"?
2
2 Using "PCoIP"?
2.3.8 <Password> Window
The <Password> window allows an administrator to update the administrative password for the device.
Note that this will affect the web interface and the local <OSD> GUI.
z Care must be taken when updating the Portal Password as the Portal may become unusable if the
password is lost.
z The Password can also be updated using the Webpage Administration Interface.
z Some PCoIP devices have password protection disabled by default and this <Password> window
is not available. Password protection can be enabled through PCoIP Management Console.
Figure 2-22: <Change Password>
z <Old Password>
The <Old Password> field must match the current administrative password for the change to take
place.
z <New Password>
The <New Password> field will be the new administrative password for both the web interface and
the local OSD GUI.
z <Confirm New Password>
The <Confirm New Password> field must match the <New Password> field for the change to take
place.
z <Reset>
In the unlikely event that a Portal password is lost, the <Reset> button allows an administrator to
request a Response code from their vendor. The Challenge code can be sent to the vendor. The
vendor will qualify the request and return a Response code if authorized.
Once the Response code is correctly entered, the Portal's password is reset to an empty string and
the administrator is prompted to enter a new password.
Contact the Portal vendor for more information when an authorized password reset is required.