Filter
Top Products
Mode :Dynamic
Contrast 100
Brightness 45
Sharpness 75
Color 55
Tint G 50 R 50
Color Tone : Cool1
More
Picture
TV
Move Enter
Mode : Dynamic
Contrast 100
Brightness 45
Sharpness 75
Color 55
Tint G 50 R 50
Color Tone : Cool1
More
Picture
TV
Move Enter
English-25
Picture Control
Using Automatic Picture Settings
Your TV has three automatic picture settings (“Dynamic”, “Standard”, and “Movie”) that are preset at the factory.
You can activate either Dynamic, Standard, or Movie by making a selection from the menu.
1. Press the MENU button to display the menu.
Press the ENTER button to select “Picture”.
2. Press the ENTER button again.
Press the
……
or
††
button to select the “Dynamic”, “Standard”, or “Movie”
picture setting, then press the ENTER button.
➢
Picture mode needs to be adjusted separately for each input.
3. Press the
……
or
††
button to select “Contrast”, “Brightness”, “Sharpness”,
“Color”, or “Tint”, then press the ENTER button.
4. Press the œ or √ button to decrease or increase the value of a particular item.
➢
• In PC mode, only the Contrast and Brightness can be selected.
• Each adjusted setting will be stored separately according to its input mode.
5. Press the ENTER button to return to “Mode”.
6. Press the
……
or
††
button to select “Color Tone”, then press the ENTER button.
7. Press the
……
or
††
button to select “Cool2”, “Cool1”, “Normal”, “Warm1”,
or “Warm2”, then press the ENTER button.
➢
When the picture mode is set to Dynamic or Standard, Warm1 and Warm2 cannot be
selected. Movie mode is only available.
Choose Dynamic for viewing the TV during the day or when there is a bright light in
the room.
Choose Standard for general TV watching mode.
Choose Movie when viewing a movie.
Press the P. MODE button on the remote control to select one of the standard picture
settings.
Contrast
100
Mode : Dynamic
Contrast 100
Brightness 45
Sharpness 75
Color 55
Tint G 50 R 50
Color Tone : Cool1
More
Picture
TV
Move Enter
Mode : Dynamic
Contrast 100
Brightness 45
Sharpness 75
Color 55
Tint G 50 R 50
Color Tone : Cool1
More
Picture
TV
Move Enter
Cool2
Cool1
Normal
Warm1
Warm2
Resetting the Picture Settings to the Factory Defaults
8. Press the
……
or
††
button to select “Reset”, then press the ENTER button.
9. Press the
……
or
††
button to select “OK” or “Cancel”, then press the ENTER button.
Press the EXIT button to exit.
➢
Each picture mode can be reset.
Dynamic
Standard
Movie
Mode : Dynamic
Contrast 100
Brightness 45
Sharpness 75
Color 55
Tint G 50 R 50
Color Tone : Cool1
More
Picture
TV
Move Enter
Return
More
Detail Settings
Size : 16:9
Digital NR : Auto
Active Color : On
DNIe : On
Reset : OK
Picture
TV
Move Enter
Move
Adjust
Return
Return
Return
Return
Return
Return
OK
Cancel
BN68-00866X-00Eng_0326 3/26/07 10:13 AM Page 25