Filter
Top Products
Source List / Edit Name
Source List
Use to select TV or other external input sources such as DVD / Blu-Ray players / Cable
boxes / Satellite receivers (Set-Top Box) connected to the TV. Use to select the input
source of your choice.
TV, AV1, AV2, Component1, Component2, PC, HDMI1, HDMI2/DVI, HDMI3,
HDMI4.
You can choose only those external devices that are connected to the TV. In the
Source List, connected inputs will be highlighted and sorted to the top. Inputs that
are not connected will be sorted to the bottom.
Using the Color buttons on the remote with the Source list
Red (Refresh): Refreshes the connected external devices.
Press this if your Source is on and connected, but does not appear in the list.
T
TOOLS (Tools): Displays the Edit Name and Information menus.
Press the SOURCE button on the remote control to view an external signal source.
Edit Name
You can name the device connected to the input jacks to make your input source
selection easier.
VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game /
Camcorder / PC / DVI PC / DVI / TV / IPTV / Blu-Ray / HD DVD / DMA
When a PC with a resolution of 1920 x 1080@60Hz is connected to the
HDMI IN 2(DVI) port, you should set the HDMI2/DVI mode to PC in the Edit Name
menu.
Support
Self Diagnosis
Picture Test
If you think you have a picture problem, perform the picture test. Check the color pattern
on the screen to see if the problem still exists.
Does the problem still exist with this test photo? appears on the screen.
If the test pattern does not appear or there is noise in the test pattern, select Yes.
If the test pattern is properly displayed, select No.
Yes: There may be a problem with the TV. Contact the Samsung Call center.
No: There may be a problem with your external equipment. Please check your
connections. If the problem still persists, refer to the external device’s user manual.
Sound Test
If you think you have a sound problem, please perform the sound test. You can check the
sound by playing a built-in melody sound through the TV.
Does the problem still exist with this sound test? appears on the screen.
If during the sound test you can hear sound only from one speaker or not at all, select
Yes.
If you can hear sound from the speakers, select No.
Yes: There may be a problem with the TV. Contact the Samsung Call center.
No: There may be a problem with your external equipment. Please check your connections. If the problem still persists, refer to
the external device’s user manual.
If you hear no sound from the TV’s speakers, before performing the sound test, make sure Speaker Select is set to TV speaker
in the Sound menu.
The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing
the MMUTE button.
❑
N
N
•
•
O
❑
N
❑
N
•
•
N
•
•
N
N
Continued...
English - 35
Edit Name
AV1
AV2
Component1
Component2
PC
HDMI1
HDMI2/DVI
▼
Enter ReturnMove
----
VCR
DVD
Cable STB
Satellite STB
PVR STB
Source List
Edit Name
Input
Self Diagnosis
Picture Test ►
Sound Test
Signal Strength
ReturnEnter
Move
Self Diagnosis
►
Software Upgrade
HD Connection Guide
Contact Samsung
Support
BN68-02221A_Eng.indb 35 2009-03-13 오후 6:38:43