Samsung PS42P2SB Flat Panel Television User Manual


 
11
Installing the Display on the Wall Attachment Panel
ENG
4 Remove four large screws from the rear side of the display.
Insert the bolts, dish-type washers, and insulation rubber
into the four screw-holes as shown in the figure:
5 Hang the protruding plastic part on
the rear of the PDP up the groove on
the top of the wall attachment panel.
Then, lift down the PDP. (Do not lift
down the PDP with too much force.
The protruding plastic part might be
taken off.)
Bolt
Insulation rubber
´
Œ