![](http://pdfasset.owneriq.net/b/0e/b0e18920-a3be-4a9b-8821-b669cf42efc0/b0e18920-a3be-4a9b-8821-b669cf42efc0-bge.png)
14
ENG
Connecting to an Aerial (or Cable Television Network)
To view television channels correctly, a signal must be received by
the set from one of the following sources:
◆ An outdoor aerial
◆ A cable television network
◆ A satellite network
1 In the first three cases, connect the aerial or network input cable to
the 75Ω coaxial socket on the rear of the Media Station.
2 If you are using an indoor aerial, you may need to turn it when
tuning your television until you obtain a picture that is both sharp
and clear.
For further details, refer to:
◆ “Storing Channels Automatically” on page 20
◆ “Storing Channels Manually” on page 22
Rear of the
Media Station
Cable Television
Network
or