Samsung PS-42V4S Flat Panel Television User Manual


 
40
ENG
The “DUAL I-II” button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either “Dual-I ” or “Stereo”, depending on
the current transmission.
If the receiving conditions deteriorate, listening will be
easier if the mode is set to the Mono.
If the stereo signal is weak and an automatic switching
occurs, then switch to the Mono.
When receiving a mono sound in the AV mode, connect
to the “AUDIO-L” input connector on the side of the
television. If the mono sound comes out only from left
speaker, press the Dual I-II button.
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM Stereo
NICAM Dual-I/II
Regular broadcast
(Standard audio)
Bilingual or Dual-I/II
Stereo
On-screen indication
Mono (Normal use)
NICAM Mono
Mono
NICAM Stereo
Mono
(Forced mono)
Mono
Dual-I
Dual-II
Stereo
Mono
(Forced mono)
NICAM Dual-I
NICAM Dual-II
Mono
NICAM
Stereo
A2
Stereo
Selecting the Sound Mode (depending on the model)
1_BN68-00630T-00_Eng 6/9/04 9:16 AM Page 40