44
ENG
Viewing an External Signal Source
Use the remote control to switch between viewing signal from
connected equipment, such as VCR, DVD, Set-Top-boxs and the TV
source (broadcast or cable)
1 Press the MENU button.
Result
: The main menu is displayed.
2 Press the ▼ or ▲ button to select Input .
Result
: The options available in the Input group are
displayed.
3 Press the ENTER () button.
4 Press the ▼ or ▲ button to select Source List.
Press the ENTER () button.
Result
: The options available in the Source List group are
displayed.
5 Press the ▼ or ▲ button to select signal source, then press the
ENTER () button.
➢ When you connect equipment to the TV, you can choose
between the following sets of jacks : Ext.1, Ext.2, AV,
S-Video, Component or DVI on the TV’s rear panel.
6 Press the MENU button again, press the ENTER () button
to select Input.
7 Press the ▼ or ▲ button to select Edit Name . Press the ENTER
() button.
Result
: The options available in the Edit Name group are
displayed.
8 Press the ▼ or ▲ button to select external device :
Ext.1 - Ext.2 - AV - S-Video - Component - DVI
9 Press the ENTER () button.
Result
:
The
Edit Name
available are listed
.
10 Select the name by pressing the † or … button.
Press the ENTER () button.
11 Set other signal sources (VCR, DVD, Cable STB, HD STB,
Satellite STB, AV Receiver, DVD Receiver, Game,
Camcorder, DVD Combo or DHR) using the same method as listed
above.
➣
You can also set these options simply by pressing the
TV/VIDEO ()button. If you change the external source
while viewing, pictures might take a short period of time to
be switched.
➣
DHR : DVD HDD Recorder
Source List : TV
√√
Edit Name
√√
Input
Move Enter Return
TV
Source List : TV
√√
Edit Name
√√
Input
Move Enter Return
TV
TV
Ext.1
----
Ext.2
----
AV
----
S-Video
----
Component
----
DVI
----
Source List
Move Enter Return
TV
Ext.1 :
Ext.2
:
AV :
S-Video :
Component :
DVI :
Edit Name
Move Enter Return
TV
----
VCR
DVD
Cable STB
HD STB
Satellite STB
†
1_BN68-00630T-00_Eng 6/9/04 9:16 AM Page 44