Filter
Top Products
22
Preparations
1
1 Preparations
Adjust the screen brightness.
Volume can be adjusted if a cable is connected to the [DP IN] or [HDMI
IN] port.
Confirm a menu selection.
Pressing the [ ] button when the OSD menu is not displayed will
change the input source (Digital/DisplayPort/HDMI). If you power on the
product or change the input source by pressing the [ ] button, a
message that shows the changed input source will appear at the top left
corner of the screen.
Move to the upper or lower menu or adjust the value for an option on the
OSD menu.
The [ ] button opens the ECO menu directly. You do not need to go
to SETUP&RESET - ECO.
Turn the screen on or off.
Power lamp
The power indicator will be lit when the product is operating normally.
z Refer to "9.2 PowerSaver" for details about the power-saving
function.
z To reduce power consumption, it is best to remove the power
cable when you will not be using the product for an extended
period of time.
Icons Description