Filter
Top Products
ENG-35ENG-34
1.
With the unit in Stop mode, press the MENU button.
2. Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
3. Select Audio Setup using UP/DOWN buttons,
then press the RIGHT or ENTER button.
4. Use the UP/DOWN buttons to select the desired
item.Then press the RIGHT or ENTER button.
Dolby/DTS Digital Out
1. PCM :Converts to PCM(2CH) audio.
2. Bitstream :Outputs Dolby Digital or DTS Bitstream via
digital output. Select Bitstream when connecting to a
Dolby digital and DTS Decoder.
Note There is no analog audio output when you play
a DTS disc.
Dynamic Compression
1. On :To select dynamic compression.
2. Off :To select the standard range.
Setting Up the Audio Options