Filter
Top Products
ENG-11ENG-10
This remote control can also control most TVs. See page 40.
8. SEARCH Buttons ( / )
• Allow you to search forward/backward through a disc.
9. STOP Button ( )
10. MENU Button
• Brings up the DVD player’s menu.
11. RETURN Button
• Returns to a previous menu.
12. ZOOM Button
• Enlarges DVD picture.
13. AUDIO Button
•
Use this button to access various audio functions on a disc.
14. SUBTITLE Button
15. INDEX Buttons
• Use to skip the INDEX.
16. SACD/CD Button
• Selects Super Audio CD or CD playback mode.
17. SHUTTLE DIAL (Search mode)
• Performs fast motion play.
18.TV POWER button
• Turns the TV’s power on or off.
19. CLEAR Button
•
Use to remove menus or status displays from the screen.
20. INSTANT SKIP Button
• This function skips playback ahead 10 seconds.
21. INSTANT REPLAY Button
• This function is used to replay the previous 10
seconds of a movie from the current position.
22. CH / buttons
• Channel selection.
23. OPEN/CLOSE ( ) Button
• To open and close the disc tray.
24. HDMI SEL. Button
• HDMI or DVI Output resolution setup.
25. SKIP Buttons ( / )
• Use to skip the title, chapter, or track.
26. PLAY/PAUSE Button ( )
• Begin/Pause disc play.
27. INFO Button
• Displays the current disc mode.
28. DISC MENU Button
• Brings up the Disc menu.
29. ENTER/DIRECTION Button
(UP/DOWN or LEFT/RIGHT Buttons)
• This button functions as a toggle switch.
30. EZ VIEW Button
• Easy View can convert Letter Box images to full
screen viewing on your conventional TV.
31. ANGLE Button
• Use to access various camera angles on a DVD.
32. REPEAT Button
• Allows you to repeat play a title, chapter, track, or disc.
33. PAGE Buttons
• Use to skip the PAGE.
34. BOOKMARK Button
35. JOG DIAL (Step mode)
• Operates frame by frame play.In CD mode, performs
track search.
D
VD Function Buttons
1. DVD POWER Button
• Turns the power on or off.
2. NUMBER Buttons
3. PROG Button
• Allows you to program a specific order.
4. STEP Button
• Advances play one frame at a time.
5.VOL +/- Buttons
• Control volumes.
6.TV/VIDEO Button
• Press to display all of the available video sources
( i.e., TV, Cable, Video)
7.VIDEO SEL. Button
• Selects Video output format.
Tour of the Remote Control
HDMI SEL.
1
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Description-Rear Panel
Rear Panel
1. DIGITAL AUDIO OUT JACKS
• Use an optical or coaxial digital cable to connect
to a compatible Dolby Digital receiver.
Use to connect to an A/V Amplifier that contains
a Dolby Digital or DTS decoder.
2. 5.1CH ANALOG AUDIO OUT JACKS
• Connect to an amplifier with 5.1ch analog input
jacks.
3. AUDIO OUT JACKS
• Connect to the Audio input jacks of your
television, audio/video receiver.
4.VIDEO OUT JACK
• Use a video cable to connect to the Video input
jack on your television.
5. S-VIDEO OUT JACK
• Use the S-Video cable to connect this jack to
the S-Video jack on your television for a higher
quality picture.
• The Video Output in Setup Menu must be set to
S-Video, P-SCAN, or HDMI-DVI.
6. HDMI OUT JACK
• Use the HDMI or HDMI-DVI cable to connect
this jack to the HDMI or DVI jack on your
television for the best quality picture.
• If HDMI cable is connected with TV available for
HDMI output, HDMI mode will work
automatically.
7. COMPONENT OUT JACKS
• Use these jacks if you have a TV with
Component Video in jacks. These jacks provide
Pr, Pb and Y video.
• If Component (P-SCAN) is selected in Setup
Menu, P-SCAN mode will work.
• If Component (I-SCAN) is selected in Setup
Menu, I-SCAN mode will work.
8. ANYNET JACK
• Use these jacks if you have a TV with ANYNET
jack.These jacks provide you with a control this
unit with a TV remote.
Important Note
• Consult your TV User’s Manual to find out if your
TV supports Progressive Scan. If Progressive
Scan is supported, follow the TV User’s Manual’s
instructions regarding Progressive Scan settings in
the TV’s menu system.
• The HDMI output of this unit can be connected to
a DVI jack on a TV or other device using a conver-
sion adapter. In this case, it is necessary to use a
TV or display with an HDCP-compatible DVI input.
• There may be no image output if connected to a
TV or display that is not compatible with the above
format (See page 16).
• HDCP(High-bandwidth Digital Content Protection)
is a system for protecting DVD content outputted
via DVI from being copied. It provides a secure
digital link between a video source(PC, DVD. etc)
and a display device(TV, projector. etc).
Content is encrypted at the source device to
prevent unauthorized copies from being made.
• Refer to the instruction manual of the TV or display
to be connected to this unit for detailed information
regarding the HDMI terminal.
• See page 38 to get more information on how to
use the setup menu.
12 34
5
17
68