Filter
Top Products
ENG-13ENG-12
Choosing a Connection
Connection to a TV (For Video)
TV (Normal, Widescreen, Projection, etc..)
1. Connect a cable with the desired method.
2.Turn on your TV and DVD Player.
3. Set your TV the correct video input by pressing TV/VIDEO button on. (See page 40)
4. Select the video output according to the cable connection.
If you use the VIDEO SEL. button, you can change easily video output in no disc mode.
Method 1
DVD Player + TV with Video Input Jack
Method 2
DVD Player + TV with S-Video Input Jack
(The Video Output in Setup Menu must be set to S-Video, P-SCAN or HDMI-DVI.)
S-Video output does not work when the Video Out in Setup Menu is set to Component (I-SCAN).
Method 3
DVD Player + TV with Component Video Jacks
(The Video Output in Setup Menu must be set to Component (I-SCAN).)
The screen will be red if Video Out is set incorrectly to S-Video.
Note
• If you press the VIDEO SEL. button with no disc in the unit, the Video output mode changes in the following
sequence:
(S-Video ➝ I-SCAN ➝ P-SCAN)
TV
DVD
Player
Method 1 Method 2 Method 3
Basic Audio Video S-Video Interlace scan
Audio Output Jacks
OR OR
AV
Cable
S-Video
Cable
Component
Video
Cables
Video Output Jack
S-Video Jack
Component Video Jacks
Choosing a Connection
The following shows examples of connections commonly used to connect the DVD player with a TV
and other components.
Bef
ore Connecting the DVD Player
• Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.
• If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.
• Refer to the owner’s manual of the additional components you are connecting for more information on those
particular components.
Connection to an Audio System
Note
• DVD-AUDIO only plays back two channel audio through the Digital Audio out. Multi-channel DVD-Audio discs
are output through the Analog outputs.
• Super Audio CD plays back only through the Analog outputs. (See page 35)
Method 1 Method 2
Mixed Audio Output Jaks
(2 Channel)
Analog Audio Output Jacks
(Multi Channel)
Digital Audio Output Jack
2ch Amplifier
Audio Input Jacks
5.1ch Analog Amplifier
Audio Input Jacks
AUDIO
SYSTEM
DVD
Player
Method 3
Dolby Digital Decoder
Digital Audio Input Jack
OR