Filter
Top Products
English - 11
YOUR NEW TV
Connection Jacks (Rear)
Use the rear panel jacks to connect an A/V component that will be connected
continuously, such as a VCR or a DVD player. For more information on connecting
equipment, see pages 14~22.
Œ
ANTENNA terminals
Two independent cables or antennas can be
connected to these terminals. Use “ANT 1 IN
(Air)” and “ANT 2 IN (Cable)” terminals to
receive a signal from VHF/UHF antennas or your
cable system.
´
DVI Video Input jack
(Digital Visual Interface)
Connect the DVI jack to a device with DVI
output.
ˇ
Anynet
Please refer to the Anynet Owner’s Instructions.
¨
OPTICAL Output jack
Connect to a Digital Audio component.
ˆ
COAXIAL Output jack
Connect to a Digital Audio component.
Ø
Audio/Video Output jacks
Connect to the audio/video input jacks of a
recording VCR.
∏
Video Input jacks
Connect to the video output jacks of VCRs, DVD
players and similar devices.
”
Audio Input jacks
Connect to the audio output jacks of VCRs, DVD
players and similar devices.
’
DVI Audio Input jacks
Connect to the audio output jacks of a device
with DVI.
˝
COMPONENT Input jacks
(Y, P
B
, P
R
, AUDIO-L/R)
Connect to the Component audio and video
outputs of DVD or DTV Set-Top Box.
480i/480p/720p/1080i Y, P
B and PR video signal
inputs are available.
BP68-00334B-01Eng 2005/05/06 12:29 PM Page 11