Filter
Top Products
Your New Wide TV
English - 14
Rear Panel Jacks
Œ
ANTENNA terminals
Two independent cables or antennas can be connected to
these terminals. Use “ANT 1 IN (CABLE)” and “ANT 2 IN (AIR)”
terminals to receive a signal from VHF/UHF antennas or your
cable system. (Refer to pages 18~19)
´
S-VIDEO INPUT jacks
Connects an S-Video signal from an S-VHS VCR or DVD player.
(Refer to pages 20 and 22)
ˇ
VIDEO/AUDIO INPUT jacks
Connect video/audio signals from external sources, such as VCR
or DVD players. (Refer to page 23)
¨
VIDEO/AUDIO OUTPUT jacks
Sends video/audio signals from the TV to an external source,
such as a VCR. These jacks are available only in RF, Video and
S-Video modes.
ˆ
COMPONENT1, 2 jacks (Y, PB, PR, AUDIO L/R)
Use these jacks to connect the component video/audio signals
from a DVD player or a Set-Top Box. (Refer to pages 23~24)
Ø
SUB-WOOFER OUT jack
Connect to an active SUB-WOOFER. (Refer to page 27)
∏
PC AUDIO INPUT jacks
Connect these to the audio output jacks on your PC. (Refer to
page 128)
”
HDMI 2/DVI IN (AUDIO L/R)
Connect to the DVI audio output jack of an external device.
’
Anynet
This jack is for connecting to other Samsung Anynet-enabled
devices. Please refer to the Anynet Owner’s Instruction.
˝
RS232C
Connect to a computer for reading and loading data information.
Ô
DIGITAL AUDIO OUT (OPTICAL) jack
Connect to a Digital Audio Component. (Refer to page 26)
PC VIDEO INPUT jack
Connect these to the video output jack on your PC.
Ò
HDMI (High Definition Multimedia Interface)/
DVI INPUT jack (HDMI IN 2/DVI IN)
Connect to the HDMI jack of a device with HDMI output.
These inputs can also be used as a DVI connection with separate
analog audio inputs. An optional HDMI/DVI cable will be
necessary to make this connection. When using the optional
HDMI/DVI adapter, the DVI analog audio inputs on your TV allow
you to receive left and right audio from your DVI device. (Not
compatible with PC) (Refer to pages 24~25)
Ú
HDMI (High Definition Multimedia Interface)
INPUT jacks (HDMI IN 1)
Connect to the HDMI jack of a device with HDMI output.
(Not compatible with PC)
Æ
D-Net (IEEE1394) S400 MPEG
Connect to external IEEE1394 digital products such as digital
VCRs and camcorders. Two jacks are provided for this purpose,
which allow for a high degree of flexibility for connecting your
D-Net controlled system. (Refer to pages 112~126)
ı
SERVICE
This jack is for software upgrades.
˜
CableCARD
TM
Insert the CableCARD into the slot. (Refer to page 21)
¯
G-LINK
TM
Connect the IR controller cable to the G-LINK
TM
terminal on your TV.
(Refer to page 104)
BP68-00520A-00Eng(002~017) 6/13/05 9:33 AM Page 14