Filter
Top Products
English-40
Checking the Digital-Signal Strength
LNA (Low Noise Amplifier)
1. Press the MENU button to display the menu.
Press the
……
or
††
button to select “Channel”, then press the ENTER button.
2. Press the
……
or
††
button to select “LNA”, then press the ENTER button.
3. Press the
……
or
††
button to select “Off” or “On”, then press the ENTER button.
Press the EXIT button to exit.
➢
LNA functions only when antenna is set to AIR. (See “Selecting the Antenna”
on page 36)
➢
If the picture is noisy with the LNA set to On, select Off.
➢
The LNA setting must be made separately for each channel.
If the TV is operating in a weak-signal area, sometimes the LNAfunction can improve the reception (a low-noise preamplifier boosts the
incoming signal).
1. Press the MENU button to display the menu.
Press the
……
or
††
button to select “Channel”, then press the ENTER button.
2. Press the
……
or
††
button to select “Signal Strength”, then press the ENTER button.
If the signal strength meter indicates that the signal is weak, physically adjust
your antenna to increase the signal strength.
Continue to adjust the antenna until you find the best position with the strongest signal.
Press the EXIT button to exit.
You can also press the ENTER button to select OK then press the EXIT button
to exit the menu.
Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) channels have either perfect reception
quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel. You can, however, adjust
your antenna to improve the reception of available digital channels.
Antenna : Air
√
Auto Program
√
Channel Manager
√
Name
√
Fine Tune
√
Signal Strength
√
†
More
Channel
TV
Move Enter Return
Signal Strength
TV
Return
Enter
OK
…
More
LNA : On
√
Channel
TV
Move Enter Return
…
More
LNA : Off
Channel
TV
Move Enter Return
Off
On
BN68-01094L-00Eng 8/7/06 1:44 PM Page 40