Filter
Top Products
ENG 5.3
Adjusting the Screen Quality
The purpose of picture quality adjustment is to remove or reduce picture noise.
If the noise is not removed by fine tuning alone, then do the frequency adjustments to
the utmost and fine tune again. After the noise has been reduced, re-adjust the picture so
that it is aligned on the center of screen.
Press the TV/VIDEO button on the remote control to select the PC Analog mode.
1
Press the MENU button to
display the menu.
Press the CH ▼ button to
select “PC”, then press
the VOL + button.
3
Press the CH ▼ button to
select “Coarse” or “Fine”.
Press the VOL + or VOL -
button to adjust the
screen quality, vertical
stripes appear or the pic-
ture may be blurry.
2
Press the CH ▼ button to
select “Image lock”, then
press the VOL + button.
4
When you are satisfied with the settings, press the MENU but-
ton repeatedly to return to normal viewing.
PC DISPLAY
<Adjusting Coarse>
<Adjusting Fine>