Filter
Top Products
English-21
OPERATION
To Edit the Input Source Name
Name the input device connected to the input jacks to make your input source selection easier.
1
Press the
UP/DOWN buttons
to select “Edit Name”,
then press the
ENTER button.
2
Press the
UP/DOWN buttons
to select
“AV”, “S-Video”,
“Component1”,
“Component2” or “PC”
then press the
ENTER button.
3
Press the
UP/DOWN buttons
repeatedly until the
correct VCR appears.
After the VCR is
entered, press the
ENTER button.
victoryia 17-47 6/27/03 2:05 AM Page 21