Filter
Top Products
English-53
Adjusting the Screen Quality
The purpose of the picture quality adjustment is to remove or reduce picture noise. If the
noise is not removed by fine tuning alone, then do the frequency adjustments to the
utmost and fine tune again. After the noise has been reduced, re-adjust the picture so that
it is aligned on the center of screen.
Press the PC button on the remote control to select the PC mode.
1
Press the MENU button
to display the menu.
Press the DOWN
button to select “PC”,
then press the
RIGHT button.
2
Press the DOWN
button to select
“Coarse” or “Fine”.
3
Press the
LEFT/RIGHT
button to adjust the
screen quality, vertical
stripes appear or the
picture may be blurry.
4
When you are satisfied with the settings, press the
MENU button repeatedly to return to normal viewing.
PC DISPLAY
<Adjusting Coarse>
<Adjusting Fine>
09.CHAPTER5_EN 9/2/03 3:25 AM Page 53