Samsung TX P2034 CRT Television User Manual


 
18
INSTALLATION
2
Connect an audio cable
between the AUDIO OUT-
PUT jack on the camcorder
and the AUDIO terminals
on the side of the TV.
3
Connect a video cable
between the VIDEO OUT-
PUT jack on the camcorder
and the VIDEO terminal on
the side of the TV.
1
Locate the A/Voutput jacks
on the camcorder. They are
usually found on the side or
back of the camcorder.
Connecting a Camcorder
The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow
you to view the camcorder tapes without using a VCR. (Also see Viewing a VCR or
Camcorder Tape on page 31.)
The audio-video cables shown here are usually included with a Camcorder. (If not, check
your local electronics store.) If your camcorder is stereo, you need to connect a set of two
cables.
Note: This figure shows the Standard connector-jack panel. The actual configuration for your TV
may be different.
Camcorder
Output Jacks
Camcorder
Output Jacks
Audio Cable
Video Cable
Y-Connector
TVSide Panel
Camcorder
Output Jacks
TVSide Panel
AA03382A-00_SEA/SECA_ENG 3/10/04 2:29 PM Page 18