Filter
Top Products
YOUR NEW TV
English - 11
Connection Jacks (Rear)
Use the rear panel jacks to connect an A/V component that will be connected
continuously, such as a VCR or a DVD player.
For more information on connecting equipment, see pages 14 – 24.
Œ
S-Video Input jack
Connect to S-Video output jack of an S-VHS VCR
or DVD player.
´
Video Input jacks
Connect to the video output jacks of VCRs, DVD
players and similar devices.
• The Y Component video 1 and 2 input jacks
also function as the regular (composite)
video 2 and 3 input jacks.
ˇ
Audio Input jacks
Connect to the audio output jacks of VCRs, DVD
players and similar devices.
• The component audio 1 and 2 input jacks also
function as the audio 2 and 3 input jacks for
regular (composite) video.
¨
Audio-Video Output jacks
Connect to the audio/video input jacks of a
recording VCR.
ˆ
Component Input jacks
(Y, P
B
, P
R
, AUDIO-L/R)
Connect to the Component audio and video
outputs of a DVD or DTV set-top box.
480i/480p/720p/1080i Y, PB, and PR video signal
inputs are available.
Ø
UPGRADE PORT
For service only
∏
HDMI
(High Definition Multimedia Interface)
Input jack
Connect to the HDMI jack for device with HDMI
output.
”
Digital Audio Output jack
(OPTICAL)
Connect to a Digital Audio component.
’
ANTENNA terminals
Two independent cables or antennas can be
connected to these terminals. Use “ANT 1 IN (Air)”
and “ANT 2 IN (Cable)” terminals to receive a
signal from VHF/UHF antennas or your cable
system.
AA68-03733C-00Eng 10/18/05 6:08 PM Page 11