Filter
Top Products
OPERATION
English - 30
Memorizing the Channels
Your TV can memorize and store all of the available channels for both air and cable channels.
After the available channels are memorized, use the CH and CH buttons to scan
through the channels. This eliminates the need to change channels by entering the channel
digits. There are three steps for memorizing channels: selecting a broadcast source,
memorizing the channels (automatic) and adding and deleting channels (manual).
Selecting the Video Signal Source
Before your television can begin memorizing the available channels, you must specify the
type of signal source that is connected to the TV (i.e., an antenna or a cable system).
3
Press the ▲ or ▼ button
to select “Auto Program”,
then press the ENTER
button.
1
Press the MENU button.
Press the ▲ or ▼ button
to select “Channel”, then
press the
ENTER button.
2
Press the ENTER button
to select “Antenna”.
Press the ▲ or ▼ button
to select “Air” or “Cable”,
then press the ENTER
button.
Antenna : Air √
Auto Program √
Add / Delete √
Favorite Channels √
Name √
Fine Tune √
Signal Strength √
LNA : On √
T V Channel
Antenna : Air √
Auto Program √
Add / Delete √
Favorite Channels √
Name √
Fine Tune √
Signal Strength √
LNA : On √
T V Channel
Antenna : Air
Auto Program
Add / Delete
Favorite Channels
Name
Fine Tune
Signal Strength
LNA : On
Air
Cable
Channel
T V
continued...
AA68-03739A-01Eng 10/7/05 5:40 PM Page 30