Filter
Top Products
21
Connecting a Digital TV Set-Top Box
(480p/720p/1080i)
Connecting to Y, PB, PR
Connect the Y, PB, and PR video outputs of the set-top box to their corresponding inputs on the
TV. Next, connect the Left and Right audio from the set-top box to the corresponding L and R
terminals on the TV. (The connections for a typical set-top box are shown below.)
1
Connect a coaxial cable to the ANTENNA
IN terminal on the Set-Top Box and the
antenna terminal on the TV.
2
Connect a set of audio cables between
the COMPONENT1INPUT(L, R) or COM-
PONENT2 INPUT(L, R) jacks on the TV
and the AUDIO OUTjacks on the Set Top
Box.
3
Connect a video cable between the
COMPONENT 1 INPUT (Y, PB,PR) or COM-
PONENT2 INPUT(Y,PB,PR) jacks on the
TVand the VIDEO OUT(Y,PB,PR) jacks on
the Set Top Box.
Note: For detailed information, refer to
the Set Top Box instruction manual.
INSTALLATION
TV Rear Panel
AA68-03388A-00_eng_Chapter2 4/21/04 5:24 PM Page 21