Filter
Top Products
22
INSTALLATION
Connecting to DVI (Digital Visual Interface)
By inputting a high-bandwidth Digital Content Protection high-definition picture source to the
DIGITAL INPUT jack on the TV, high-definition pictures can be displayed on the screen in
their digital forms. (This DIGITAL INPUT jack is for use in the future when High-bandwidth
Digital Content Protection DTV decoders, DVD players and D-VHS are put on the market.)
Notes
• The DIGITAL INPUT jack can only be used with 1080i, 720p and 480p picture signals.
Set the DTV decoder DIGITAL OUTPUT jack output setting to 1080i, 720p or 480p.
For detailed information, refer to the Set Top Box instruction manual.
• The DIGITAL INPUT jack is not compatible with the picture signal of a personal computer.
• Use a DVI 25-pin cable (commercially available) in order to digitally connect the TV with a
DTV Set-top box.
1
Connect a coaxial cable to the ANTENNA
IN terminal on the Set-Top Box and the
antenna terminal on the TV.
2
Connect a set of audio cables between
the DVI INPUT(AUDIO L,R) jacks on the
TVand the AUDIO OUT jacks on the Set
Top Box.
3
Connect a DVI cable between the DIGI-
TALINPUTjack on the TVand the DVI
OUTjack on the Set Top Box.
TV Rear Panel
AA68-03388A-00_eng_Chapter2 4/21/04 5:24 PM Page 22