Filter
Top Products
SHR-4160N/P USER’S MANUAL
3-5
4
Connecting USB Device
1.
A total of 2 USB connecting terminals are placed in front of and behind SHR4160N/P each.
2. Connect USB HDD, USB CD/DVD, and USB Memory through the ports in front and
behind SHR-4160N/P respectively.
3. Only one USB device can be assigned to each USB connection port.
4. To recognize/ignore USB HDD, follow the procedure of Menu - System - HDD
Setup upon connecting.
5. Supply the HOT PLUG function to connect/disconnect the USB device.
6. To recognize/ignore the HOT PLUG function, press Connect/Disconnect from Menu
- System - HDD Setup.
Caution
Caution
-
-
After enough time is given to the stabilization of the USB device
After enough time is given to the stabilization of the USB device
connected by HOT PLUG, press Connect from SHR-4160N/P
connected by HOT PLUG, press Connect from SHR-4160N/P
Menu.
Menu.
-
-
T
T
o disconnect the USB device, be sure to click Disconnect from
o disconnect the USB device, be sure to click Disconnect from
SHR-4160N/P
SHR-4160N/P
Menu. Otherwise, the USB device may be in trouble.
Menu. Otherwise, the USB device may be in trouble.
-
-
A
A
vailable to use with connecting the same kinds of USB device to the
vailable to use with connecting the same kinds of USB device to the
USB terminal on the front and back of SHR-4160N/P
USB terminal on the front and back of SHR-4160N/P
.
.
(For example, 2 CD-RW or 2 USB memories can be connected to the
(For example, 2 CD-RW or 2 USB memories can be connected to the
front and back of SHR-4160N/P
front and back of SHR-4160N/P
.)
.)
-
-
If the USB memory is used, it should be set to the format supported by
If the USB memory is used, it should be set to the format supported by
SHR-4160N/P
SHR-4160N/P
. Although it is formatted with F
. Although it is formatted with F
A
A
T32 in the PC, it is re-for
T32 in the PC, it is re-for
-
-
matted when it is connected to SHR-4160N/P
matted when it is connected to SHR-4160N/P
.
.
Caution
Caution
- The USB device HDD shall be set to Master
- The USB device HDD shall be set to Master
.
.
Note
Note
Refer to User’s Manual 5-8, SYSTEM(HDD Setup).