Filter
Top Products
5-30
Note
Note
If you want to connect IP Router with the main body of SHR-4160N/P, you shall
designate a port for SHR-4160N/P in the IP Router setup menu.
The SHR-4160N/P main body uses 4 ports for TCP communication and further 160
UDP ports when the procotol type is set to UDP. In addition, if you want to use the
DHCP function backed by IP Router to allocate Dynamic IP to the main body of
SHR-4160N/P, you shall designate a port for the IP which SHR-4160N/P has been
allocated by the IP Router setup menu.
If you use IP Router, you are recommended to rather determine IP and Port numbers to
be allocated to the main body of SHR-4160N/P from the IP Router setup menu, set the
connection mode to Static IP for the main body of SHR-4160N/P, and input the
determined IP and Port number in IP Router than use the DHCP function.
Please refer to the IP Router User’s Manual or call the manufacturer to set up IP Router.
Transfer Protocol Settings
● You may choose the protocol type, either TCP or UDP.
ADSL setup in the IP setup page can be made only to TCP.
● Port(TCP) can be selected from 554 to 998, increasing by 4.
Once the first digit is chosen, the rest 3 digits will follow the first digit.
● Port(UDP) can be selected from 8000 to 9760, increasing by 160.
Once the front port is chosen, the rest ports will change accordingly.
● Unicast/Multicast has the default of Unicast and you may choose Multicast.
●
Multicast IP shall be set to Multicast from Multicast/Unicast to be activated and for IP
setup.
Sets up the D-Class IP address from 224.0.0.0 to 239.255.255.255.
● TTl shall be also set to Multicast from Multicast/Unicast to be activated and to
choose a value from 0-255. The default is 5.