Samsung SHR-4160P DVR User Manual


 
SHR-4160N/P USER’S MANUAL
10-15
Monitoring Screen Condition Information / Selection Button
- Displays the Split or Monitoring condition of the screen in play.
: During monitoring in Nine-split Mode
Screen Split Selection Button
- Small Sized Single / Single / Quad / Nine-Split Mode
- You may change the Split Mode of the screen under monitoring.
Sequence Mode Button
Note
Note
If you connected with multi-DVRs(SHR-4160N/P) through a site, Sequence will operate as
follows.
- In Single Mode : DVR1:1CH ...DVR1:16CH DVR2:1CH ...DVR1:1CH
- In Quad Mode : DVR1:1,2,3,4CH ...DVR2:13,14,15,16CH DVR1:1,2,3,4CH ...
- In Nine-Split Mode : DVR1:1,2,3,4,5,6,7,8, 9CH DVR1:10,11,12,13,14,15,16CH
DVR2:1,2,3,4,5,6,7,8,9CH ...
- Changes the channel to be played at the preset interval.
- The sequence time interval setup follows the procedure of Setup Mode
Viewer Setup.
- In Single Mode : 1 2 3 4 5 6 7 8 9 10 11 12
13 14 15 16 1 (CH)
- In Quad Mode : 1,2,3,4 5,6,7,8 9,10,11,12 13,14,15,16 1,2,3,4 (CH)
- In Nine-Split Mode : 1,2,3,4,5,6,7,8,9 10,11,12,13,14,15,16
1,2,3,4,5,6,7,8,9 (CH)