Samsung SHR-4160P DVR User Manual


 
5-8
HDD Setup
HDD Information
Displays the number, quantity, and status of ATA, IEEE1394, and USB.
Setup is not available.
Status : Internal HDD, External HDD, Backup HDD
External HDD setup
1. Backup/External
You are able to determine the usage of IEEE1394 and USB.
Not Defined When the connected HDD usage is not defined.
Expressed in External or Backup.
No Device When no HDD is connected. You are able to press right TAB after
you connect HDD.
External When the connected HDD is set to External. It may used as a back
up HDD if you press the Enter button and turn to Backup.
Backup When the connected HDD is set to Backup. It may used as an
External HDD if you press the Enter button and turn to External.
Caution
Caution
[HDD Erase]
Data will not be deleted in backup or recording process.
Please be sure to suspend backup or recording before you delete any data.
2. Hot Plug - Connect/Disconnect
You may connect or disconnect IEEE1394 Hard Disk while power is supplied to
the SHR-4160N/P main body.
As for connecting, connect IEEE1394 Hard Disk with the SHR-4160N/P main
body and press Connect. Pressing Connect makes the SHR-4160N/P
main body recognize all connected IEEE1394 Hard Disks.
As for disconnecting, be sure to press Disconnect and detach IEEE1394
Hard Disk from the SHR-4160N/P main body safely.(Be sure to pause recording
or backup process.) Pressing Disconnect cancels and detaches all
connected IEEE1394 Hard Disk.