Samsung SHR-4160P DVR User Manual


 
5-16
3
Monitoring
Event Monitoring
You are able to set to Off/3sec/5sec/10sec/20sec/30sec/Continuous.
Off : Event Monitoring does not operate to turn to the screen where an event
occurs.
3sec/ 5sec/ 10sec/ 20sec/ 30sec : For the period, the screen is seen before the
next screen appears.
Continuous : The Event Monitoring screen remains alive until you press the front
Alarm button to cancel the screen manually.
OSG Display
Date :
The date is displayed on the screen or not depending Date remains On or Off.
Time :
The time is displayed on the screen or not depending
Time
remains On or Off.
Title :
The title is displayed on the screen or not depending
Title
remains On or Off.
Status : Audio/Ptz is displayed on the screen or not depending Status remains
On or Off.
Spot Out Channel
Spot Out channel is used to let one of two monitors monitor a channel, focusing on
it. Spot Out channel supplies two functions, continuous monitoring of only one
channel and Screen change to display all the channels one by one.
Screen change setup ranges from CH1 to CH16.
Set to Screen change, Spot Out channels are displayed in turn.
Screen change Duration is as same as determined for Camera Configuration.
Spot Out Event Monitor
Determines if event monitoring will be executed for Spot Out channels.
Off : dose not event monitoring in Spot out channel.
3sec/ 5sec/ 10sec/ 20sec/ 30sec : Duration options on the screen before it
scrolls down.
Continuous : Once scrolled down, the screen remains displayed until you delete
Alarm LED in front manually.