Filter
Top Products
PTZ camera control _43
06 PTZ CAMERA CONTROL
Press the Enter( ) button to set the PRESET after
moving the cursor on the “Setup”.
If the mode is changed to the “P/T Mode” by pressing
the “Cursor Mode”, it will be switched into the PTZ
position manipulation mode.
Move the PTZ camera to a desired position by using the
direction (
) buttons and TELE/WIDE button on
the front panel.
You can escape from the PTZ position manipulation
mode if you switch to the “Cursor Mode” by pressing “
P/T Mode
”.
Enter a PRESET number to remember the current
location of PTZ into the PRESET number. Then, press
the Enter( ) button. (PRESET numbers can be set to
1 to 20.)
You can escape from the PRESET setup mode by
pressing the “Setup” again.
PRESET NAME SETTINGS
You can set the name of each PRESET.
Press the Enter( ) button. Then, a virtual keyboard will
appear. Move the cursor to select letters. You can enter
up to 10 letters. Press “Shift” to change lowercase and
numbers to uppercase and special keys respectively.
Press “Prev” to display from PRESET 1 to PRESET
10 and press “Next” to display from PRESET 11 to
PRESET 20.
CAMERA MENU SETUP
If you press the SEARCH( ) button in the single screen
PTZ device control mode, the PTZ menu setup window
appears.
If you press “Menu” after pressing the “Setup”, the
menu screen provided by the PTZ camera is displayed.
Through this menu, you can set various functions of the
PTZ camera.
You can move to the built-in PTZ menu or set the value
by using the direction (
) buttons on the front
panel.
Press the MENU button on the front panel to exit from
the built-in camera menu.
** MAIN MENU V2.0 **
CAMERA...
VIDEO SET...
PRESET...
AUTO SET...
OTHER SET...
PTZ MODEL
P/T SPEED
ZOOM SPEED
PRESET
MODE SELECT
Samsung
Menu
1
Pan
Setup
Delete
2 3 4 5
6 7 8 9 0
Cursor Mode
OK
Pattern
Run List
Preset Name
OK
Preset
CancelNextPrev
PresetName Name
PRESET 1
PRESET 3
PRESET 5
PRESET 7
PRESET 9
PRESET 2
PRESET 4
PRESET 6
PRESET 8
PRESET 10
1
3
5
7
9
2
4
6
8
10
keyboard Dialog
PRESET 1
OK Cancel
Shift
Back
SHR-5042_Eng_02.indd 43 2008-01-25 오전 9:31:34