Samsung SHR-5040 DVR User Manual


 
64_ appendix
6 It displays whether the PTZ controls are
active.
If you have set PTZ cameras for the DVR, “PTZ”
is displayed on the screen. Select a PTZ camera
channel and use the PTZ button for camera
control.
SPLIT-SCREEN
You can change the split mode by clicking each number
icon.
SINGLE MODE QUAD MODE NINE MODE
SIXTEEN MODE
Click button.
The screen displays the selected camera
connected to the DVR in “SINGLE MODE”.
Click button.
The screen displays the selected camera
connected to the DVR in “QUAD MODE”.
Click button.
The screen displays the selected camera
connected to the DVR in “NINE MODE”.
Click button.
The screen displays the selected camera
connected to the DVR in “SIXTEEN MODE”.
FULL SCREEN MODE
Click button.
The screen displays the selected camera
connected to the DVR in “FULL SCREEN
MODE”. To back to the previous mode, press
the ESC key.
CONNECTED DVR
This displays the IP address and the status of the
connecting DVR.
• Connection failure message
No Response : Appears when the DVR does
not respond.
Wrong ID : Appears when the input ID is
wrong.
Wrong Password : Appears when the input
password is wrong.
Wrong Port Number : Appears when the port
number is wrong.
Collision : Appears when Admin mode is already
in use or simultaneous access to the same DVR
from the PC.
User Full : Appears when the maximum number
of users is exceeded.
• The numbers of simultaneous connection are
3 which includes the users for SmartViewer.
SHR-5042_Eng_02.indd 64 2008-01-25 오전 9:31:47