Filter
Top Products
SiPTel C01 IP Phone User Manual
4.4.6.2. Default Call.
Default Call allows you to select whether VOIP or PSTN should work as default when the phone goes off-
Hook. This option mainly required when u have both CABLE and PSTN connected to the same phone for
both VOIP and PSTN calls. If you are only a Dialup user, then no need to worry about this option because
PSTN port is already busy as connected to ISP for internet.
STEP 1 Select ‘5: Dflt Call’ from the PSTN menu.
Use navigation key or press the menu number to select the menu.
Press ‘Cancel’ button to move to the upper menu.
STEP 2 Select ‘2: VoIP’ to be on VoIP using cable and when not connected to ISP or not
registered to VoIP Service, PSTN can be available. You can also shift between modes by
press PSTN button as well when using CABLE Internet for VoIP
Use navigation key or press the menu number to select the menu.
Press ‘Cancel’ button to move to the upper menu.
4.4.7. HTTP PROXY
HTTP Proxy is included in the phone so as to avoid hindrances for BALANCE option web access due to
proxy servers in between.
STEP 1 Select ‘7.HTTP Proxy’ from the MAIN menu.
Use navigation key and press OK or press the menu number to
select the menu.
Press ‘Cancel’ button to move to the upper menu.
<PSTN Setup>
4: RingDuration
5: Dflt Call [Vo]
<Dflt Call:Vo>
1 : PSTN
2 : VoIP
<Setup>
6: PSTN
7: HTTP Proxy