Filter
Top Products
English - 47
Selecting the Sound Mode (depending on the model)
d.
The “DUAL I-II” button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either “Dual I ” or “Stereo”, depending on
the current transmission.
➢
◆ If the receiving conditions deteriorate, listening will be
easier if the mode is set to the
Mono.
◆ If the stereo signal is weak and an automatic switching
occurs, then switch to the
Mono.
◆ When receiving a mono sound in the AV mode, connect
to the “AUDIO-L” input connector on the panel (front or
side). If the mono sound comes out only from left
speaker, press the
DUAL I-II button.
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM Stereo
NICAM Dual I/II
Regular broadcast
(Standard audio)
Bilingual or Dual I/II
Stereo
On-screen indication
Mono
(Normal use)
NICAM ↔ Mono
Mono (Normal)
NICAM ↔ Mono
Stereo (Normal)
Mono (Normal use)
Dual I ↔ Dual II
Stereo ↔ Mono
(Forced mono)
NICAM → NICAM → Mono
Dual I Dual II (Normal)
NICAM
Stereo
A2
Stereo
→
→
BP68-00381D_01(J59A_ENG_M A) 7/25/05 10:37 AM Page 47