Filter
Top Products
English - 55
Connecting to the External Input/Outputs
☛
Whenever you connect an audio or video system to your
television, ensure that all
elements are switched off.
Refer to the documentation supplied with your equipment
for detailed connection instructions and associated safety
precautions.
➢
◆
EXT1 is used for the equipment with an RGB output, such as video game devices or video disc
players.
◆
If your externl device is connected to the COMPONENT IN video will not be output and only audio
will be output from
EXT2.
Rear of the TV
VCR
Decoder /
Video game device
Video disc player
Satellite receiver
①
This end can be fitted with:
◆ A SCART connector
◆ An S-Video connector and two audio RCA connectors (L+R); EXT 2
◆ Three RCA connectors (VIDEO + AUDIO-L and R)
②
If you have a second VCR and wish to copy cassette tape, connect the
source VCR to
EXT1 and the target VCR to EXT2 so that you can redirect
the signal from
EXT1 to EXT2.
③
If you have a decoder, connect the decoder to the VCR and the VCR to
the television.
➃
When you wish to record a programme, connect the receiver to EXT1 and
the VCR to
EXT2 so that you can redirect the signal from EXT1 to EXT2.
or
or
①
DVD
②
➃
③
BP68-00280A (J59A_Euro_ENG) 4/14/04 10:22 AM Page 55