Samsung SP55W9 CRT Television User Manual


 
25
Your television has several settings which allow you to control
picture quality.
1 Press the MENU button.
Result
:
The options available in the
PICTURE
group are
displayed.
2 Press the button.
3 Press the or button to select ADJUST. Press the button.
Result
: The options available in the ADJUST group are
displayed with
COLOUR TONE is selected.
4 Press the or button to select the option (COOL2, COOL1,
NORMAL, WARM1, WARM2).
5 Press the or button to select the option (CONTRAST,
BRIGHTNESS, SHARPNESS, COLOUR or TINT-NTSC only) to be
adjusted. Press the
or button.
Result
: The horizontal bar is displayed. Move the horizontal
bars cursor left or right by pressing the
or
button.
If you make any changes to these settings, the picture
standard is automatically switched to
CUSTOM.
Adjusting the Picture Settings
ENG
SELECT ADJUST EXIT
PICTURE
MODE
œœ
DYNAMIC
ADJUST
SCAN MODE : AUTO
DIGITAL NR : OFF
LNA : OFF
SELECT ADJUST EXIT
ADJUST
COLOUR TONE : NORMAL
CONTRAST : 100
BRIGHTNESS : 50
SHARPNESS : 75
COLOUR : 55
If no signal is being received or the signal is very weak, a blue
screen automatically replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the
BLUE SCREEN mode to OFF.
1 Press the MENU button.
Result
: The main menu is displayed.
2 Press the or button to select FUNCTION.
Result
: The options available in the FUNCTION group are
displayed.
3 Press the button.
4 Press the or button to select BLUE SCREEN.
5 Select the required option (ON or OFF) by pressing the or
button.
Setting the Blue Screen Mode
SELECT ADJUST EXIT
FUNCTION
LANGUAGE : ENGLISH
TIME
CONVERGENCE
BLUE SCREEN : ON
PLUG & PLAY
DEMONSTRATION