Samsung SP55W9 CRT Television User Manual


 
46
ENG
This TVs remote control can operate almost any VCR, Cable box,
or DVD, in addition to controlling the TV.
The remote control might not be compatible with the TV
manufactured by another company.
1 Turn off your VCR, Cable box, or DVD.
2 Press the appropriate button among the component selection
buttons to activate another component (
TV, VCR, Cable, DVD).
Example
: If you want to program the remote control to operate
your VCR, press the
VCR button on the remote
control.
3 Press the SET button.
4 Use the numeric buttons to enter the code by manufacturer. Each
code must be three digits long.
Example
: To enter the code 6, press 0, 0, and 6.
To enter the code 76, press 0, 7, and 6.
See the remote control code tables to find the appropriate
code for your particular component. If more than one code
is listed, try each one separately until you find the one that
works.
5 Press the Power ( ) button on the remote control. The
component you select should turn on. If it turns on, your remote
control is now set correctly.
If it does not turn on, repeat steps above, but try one of the
other codes listed for the brand of particular yours. If no
other codes are listed, try each code, 000 through 089
for VCR/DVD and 000 through 077 for Cable box.
6 Once your remote control is set up, press the SELECT button any
time you want to use the remote to operate your Cable box, VCR
or DVD.
When your remote control is in the VCR, Cable, or DVD
mode, the volume buttons still control your TVs volume.
When your remote control is in the TV or Cable mode,
the VCR or DVD control buttons (PLAY, PAUSE, etc.)
still operate your VCR or DVD.
Programming the Remote Control for Other Components
SET
DVDCable
VCRTV
Power